Standard heavy-duty survey tripod for stable instrument setup.
Product Overview
SOUTH NZJ2-2 is a high-precision laser plumb instrument that combines a 28X optical telescope with a visible 625nm red laser vertical reference, designed for vertical alignment and plumb measurement on building construction, equipment installation and engineering supervision projects. The vertical plumb standard deviation reaches ±5″, and the laser beam is effective over 200m in daylight and 250m at night with only a 3mm spot at 50m, making it ideal for high-rise buildings, elevator shafts, mines, water towers, chimneys, large towers and heavy equipment installation. Upward and downward laser beams are controlled by separate switches, while the high-precision tubular level and the circular bubble matched to the tripod enable fast and stable set-up. The fully sealed waterproof body resists dust, rain and shock on active sites, and 8-hour continuous working time with 3.6kg weight keeps long field shifts practical and comfortable.
How It Works: Laser Plumb Principle
This laser plumb instrument emits an accurate vertical laser reference beam. It relies on precise leveling by bubble vials to guarantee laser verticality. Surveyors mount the instrument on a stable tripod, level the bubble, activate the laser, and use the laser spot to complete vertical point transfer between upper and lower measuring positions.
Installation Tutorial
Set Up: Mount the laser plumb instrument on a stable tripod. Level the instrument by adjusting the foot screws with the circular bubble first, then fine-tune with the tubular level. Align:
Adjust the instrument position to align the laser spot with the ground benchmark point.
Read: Check the laser spot on the upper target plate to record vertical deviation.
Move & Repeat: Relocate the instrument to other measuring points and repeat the above steps for multi-point vertical survey.
Technical Specifications
|
Parameter Name |
Content |
|
Model |
NZJ2-2 |
|
Laser Wavelength |
625nm, red laser |
| Laser Output Power | 1mW |
|
Vertical Accuracy |
±5″; upward 1/100000, per observation 1/40000, downward 1/2000 |
| Magnification | 28X |
| Image | Inverted image |
| Minimum Sighting Distance | 0.8m |
| Laser Working Range | ≥200m daytime, ≥250m night; visual range 70m |
| Laser Point Diameter | 3mm@50m |
| Tubular Level Vial | 30″/2mm |
| Power Supply | Ni battery / dry batteries |
| Continuous Working Time |
8h |
| Operating Temperature | -10°C ~ +45°C |
| Dimensions | 130×300mm |
| Weight | 3.6kg |
| Protection Design | Fully sealed waterproof body |
| Accessories | Instruction manual, certificate of conformity, target plate, instrument carrying case |
Applications
Note on Deformation Monitoring
As a laser plumb instrument for vertical point transfer, the IXJ2-5 is not designed for high-precision continuous deformation monitoring over long distances. It is mainly used for on-site vertical alignment and vertical point transmission.
Compatible Accessories
01
Tripod (aluminum or wood)
Standard heavy-duty survey tripod for stable instrument setup.
02
Laser Target Plate
Reflective target plate to clearly show laser spot in bright daylight.
03
Brass Foot Screws
Precision adjustment foot screws for fine leveling.
04
Instrument Hard Case
Shockproof hard carrying case for storage and transport protection.
05
Rechargeable Lithium Battery Spare
Backup battery for long-time site field operation.
06
Sunshade
Reduce strong sunlight interference to improve laser visibility outdoors.
Calibration & Maintenance
Regular calibration ensures continued accuracy of the IXJ2-5. Recommended calibration interval is 12 months or after any heavy impact or long-term storage.
Circular Vial Calibration
Adjust foot screws until the air bubble is centered without parallax.
Laser Verticality Accuracy Check
Place the instrument on stable ground, project laser upward to a target plate, rotate instrument 360°, check laser point offset to verify vertical accuracy.
Lens Protection
Keep the laser window clean. Use soft lens cloth to wipe dust, avoid harsh chemicals on optical surfaces.
Cleaning
Wipe the housing with dry soft cloth. Do not rinse the instrument directly with water.
WE LOOK FORWARD TO WORKING WITH YOU.
We have been committed to providing high-precision measurement equipment and reliable measurement solutions for global construction, engineering, surveying, and land surveying projects.
Related Products